B1 Profile rack (Build-in racks)
The build-in distributor racks are available as fully assembled units in different versions with respect to size and fixing dimensions, for installation either in metric or in 19" racks/cabinets.
They are based on two pairs of profile rods (center-to-center distance: 95mm) for setting up patch panels with LSA PROFIL modules (particularly LSA PROFIL disconnection modules 2/8 x abs) and other modules, for example, for terminating coaxial and fibre-optic cables. A central jumpering bay is provided for vertical jumper guide units. These profile racks are used for distributor solutions where jumpering is only carried out within the frame.
ETSI/82SU profile frame 7012100100
Connection capacity:

The connection capacity depends on the length of the profile rods and on the height pitch of the modules and assemblies used. The following shows an example of the connection capacity for LSA PROFIL modules:

Order
data:
 
 
Order No.
Description
Weight/Pack
Pack
Profile racks with:
- metric fixing dimensions: 515mm
– height: N x 1 SU (= system unit = 25mm)
7012 1 001-00
ETSI/82SU profile rack
34.000 kg
1 piece
7012 1 004-00
ETSI/44SU profile rack
1 piece
7012 1 010-00
ETSI/26SU profile rack
8.900 kg
1 piece
Profile racks with:
- 19" fixing dimensions: 465mm
– height: N x 1 U (= height unit = 44.45mm)
7012 1 110-00
19"/15U profile rack
7.860 kg
1 piece
7012 1 111-00
19"/11U profile rack
1 piece
Profile racks with:
- 19" fixing dimensions: 465mm and metric fixing dimensions: 515mm
– height: N x 1 SU (= system unit = 25mm)
7012 1 002-00
ETSI/73SU - 19"/41U profile rack
27.000 kg
1 piece
 
Keyword for Index :
Profil rack 19"/ETSI
KRONE GmbH, Productmanagement, subject to change without notice !
Data from :
27-FEB-2003 15:01:03