A2 Vt PROFIL-Bw7R
The open profile-rod distribution racks in different heights are single-vertical racks measuring 242.4mm in width, adapted to the 7R design. They consist of a pair of profile rods on the left side for setting up distribution panels with LSA PROFIL modules (particularly LSA PROFIL disconnection modules 2/8 x abs without a left jumper guide ring) and other modules, for example, for the termination of coaxial and fibre-optic cables which can be clicked on to the profile rods which are spaced 95mm apart.
The distribution rack consists of a vertical, U-shaped support plate with holders for the profile rods. The vertical jumpering unit is located on the right-hand side of the rack. A ring is located in the centre of the rack for horizontal jumpering to neighbouring racks.
The rack components are powder-coated and galvanised or nickel-plated. The profile rods and profile holders are made of stainless steel.
All the components of the rack are connected to a common earth potential. Points for connecting the FPE cable (min. cross-section: 25 mm2 copper) to the earthing ring conductor are located on the top and foot rails of the rack.
The rack is delivered fully assembled.

Material:
q
Frame component: powder-coating, RAL 7032 and galvanised / nickel-plated
q
Profile-rod: high-grade steel
q
Profile-rod: high-grade steel

The racks can be set up as follows
q
Wall-secured standing rack
(can be arranged in rows, fixed to the floor and the wall)
q
Free-standing rack, single-sided
(can be arranged in rows, fixed to the floor and the ceiling or to a ceiling grid)
Accessories for floor and tray fixing are supplied with the racks.
Vt PROFIL-Bw7R-2600, free-standing rack, single-sided
Connection capacity:

The connection capacity depends on the length of the profile rods and on the height pitch of the modules and assemblies used.
The following shows an example of the connection capacity for LSA PROFIL modules:

Order
data:
 
 
 
 
 
 
 
Order number  
Item   
Description
Order number
Racks
Wall-secured standing rack  
Free-standing rack, one-sided  
6577 1 125-00
1
Vt PROFIL-Bw7R-2600
1
1
6577 1 126-01
31)
Vt PROFIL-Bw7R-2200  
1
1

1)    with additional earth bar (vertical)

Additional accessories required
 
 
 
Order number  
Item   
Description
Order number
Accessories
Wall secured standing rack  
Free-standing rack, one-sided  
6971 2 239-00
42)
Kick-bar set
(Width 242.4 mm)
1
1
6971 2 145-00
5
Ceiling fixing kit
(h = 1000 mm, w = 242.4 mm)  
-
1

2)    when necessary, used for item 3

Vt PROFIL-Bw7R-2200, wall-secured standing rack
Vt PROFIL-Bw7R-2200, free-standing rack, single-sided
Keyword for Index :
A2 Vt PROFIL-Bw7R
KRONE GmbH, Productmanagement, subject to change without notice !
Data from :
25-MAR-2003 12:09:58